CYP

Buy Now  Request a Demo

Showing 12 products

  • Default sorting
  • Sort by popularity
  • Sort by average rating
  • Sort by newness
  • Sort by price: low to high
  • Sort by price: high to low
  • No results match your keyword.

CYP Receiver PU-507WPRX HDBaseT W/Plate

The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. ?This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.


Specifications:
HDCP 2.2 Compliant
Supports all v1.4 HDMI resolutions plus 4K
Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
HDMI, HDCP, & DVI compliant
Supports HDCP repeating and CEC functions
Uncompressed data transfer over single CAT cable (100m - CAT6/7; 80m - CAT5e)
Uncompressed video 1080p, 60Hz, 48bits
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
5-Play™ convergence: HDMI, LAN, PoC & Control (IR & RS232)
Supports 3D signals
4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7

Model Code: PU-507WPRX
Retail: R 6 835.00

CYP 20m Fiber AOC HDMI Cable, 18Gbps (6G

Introducing the latest in HDMI cable technology, the CYP HDMI-AOC-20M fiber cable. AOC (Active Optical Cable) allows full 4K UHD resolution support (2160p @ 60hz) to be transmitted over 20 metres. This technology accepts the same electrical inputs as a traditional copper HDMI cable, but uses optical fiber between the connectors. AOC uses electrical to optical conversion over the directional cable ends to improve distance performance, without sacrificing any signal integrity.

The low profile cast connectors allow for easy installation of the HDMI cable and offer a secure connection to the connected source and display. The cable also offers increased flexibility and durability with its slimline narrow rubber cord. *Taking it's power from the 5V pin of the connected source, the HDMI-AOC-20M doesn't require an additional power supply to operate.

*Please note - The HDMI-AOC-20M is a directional cable and needs to be installed following the correctly labelled 'TV' & 'Source' connectors in the correct position

Specifications:
Full 4k / UHD resolution support (2160p @ 60Hz 4:4:4)
HDR (High Dynamic Range) support
High quality low profile cast metal connectors with precision 24k gold plated termination
Clearly labelled 'Source' & 'Display' connectors for providing power to the cable
High Frame Rate (600MHz)
High Bandwidth (full 18 Gbps)
BT.2020 Colorimetry (10/12 bit / 4:4:4)
ARC (Audio Return Channel) support
CEC (Consumer Electronic Control) support
32 Channel Audio (Dolby Atmos and DTS:X) support
Full High Definition 3D support
HDCP2.2 compliant

Inputs1x HDMI [1x HDMI Uncompressed AV and Data]
Outputs1x HDMI [1x HDMI Uncompressed AV and Data]
Dimensions20000mm [W] x 14mm [D] x 6mm [H]
Net Weight200g
Gross Weight600g

Model Code: HDMI-AOC-20M
Retail: R 7 760.00

CYP Audio De-Embedder 4K AU-1H1DD-4K22

The AU-1H1DD-4K22 is an advanced solution for de-embedding and down-mixing audio signals from the HDMI input (up to Dolby® Digital and DTS® 2.0+Digital Out). Connect the AU-1H1DD between the source and your display via HDMI, and select 2CH LPCM or bypass. The digital audio outputs can be set to either 2CH LPCM or bypass. The L/R analogue outputs will always output down-mixed stereo (with audio up to Dolby® Digital and DTS® 2.0+Digital Out). This device supports the latest 4K2K resolutions, HDMI2.0 and HDCP2.2 for stunning results. 

Specifications:
HDCP 2.2, HDMI2.0, and DVI compatible
Built-in Dolby Digital Decoder
Built-in DTS 2.0+Digital Out Decoder
Integrated digital interpolator filter and Digital-to-Analog Converter (DAC)
Supports HDTV resolutions up to 4K2K: 3840×2160@24/25/30Hz, 4096×2160@24/25/30Hz, 3840×2160@50/60Hz (YUV444) & 4096×2160@50/60 (YUV444)
Supports simultaneous audio outputs on HDMI, analogue L/R, Coaxial and Optical
Supports Dolby Digital sampling rates up to 48kHz
Supports DTS sampling rates up to 96kHz
Supports LPCM input sampling rates up to 96kHz
Supports coaxial and optical output audio sampling rates up to 96kHz
Supports up to 3m HDMI cables on input & output

Model Code: AU-1H1DD-4K22
Retail: R 9 300.00

CYP Audio De-Embedder 5.1 AU-11CD

The AU-11CD is an advanced solution for repeating HDMI with integrated Audio de-embedding, up to 5.1. Connect the AU-11CD between your source and display via HDMI, and select the audio format required.

Specifications:
Compliant with v1.3 HDMI, HDCP 1.2 and DVI 1.0
Supports HDMI Sample Rates up to 192 kHz
Supports Optical Sample Rate up to 48 kHz
Supports TMDS clock frequency rate 225MHz
Supports high-bit-rate (HBR) audio
Supports resolutions of 1080P up to cable lengths of 10m either side of the device
Supports built-in audio EDID switch of LPCM2, 5.1/7.1 or Bitstream
Supports 3D signals 

Model Code: AU-11CD
Retail: R 3 520.00

CYP Coax to Toslink Converter AU-D2

Digital Audio Coaxial to Tosling Convert
The AU-D2 is a versatile digital audio converter, either coaxial to optical or optical to coaxial.  Simply select one of the digital audio inputs for two identical audio signals in both output formats.

Specification:
Digital Audio Coaxial/Optical bi-directional Converter
Two-way conversion; Coaxial to Optical or Optical to Coaxial
Re-clocking function enables the use of extended cable distances
Inputs accept audio signals from 2-channel PCM to 5.1. Output signal follows input signal
Select between input ports, and distribute the audio signal to both Coaxial and Optical output ports simultaneously
Inputs1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
Outputs1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
PSU:5V/1.2A
Dimensions58mm [W] x 46mm [D] x 24mm [H]
Net Weight160g
Gross Weight220g

Model Code: AU-D2
Retail: R 1 250.00

CYP DAC AU-D3-192 (192kHz)

The AU-D3-192 is designed to convert either Coaxial or Optical signals from a digital stereo signal to analogue stereo audio. With an advanced 192kHz sampling rate, this unit is particularly useful for enhancing sound reproduction when connecting digital sources to analogue amplifiers.

Specifications:
Digital Audio to Left/Right Stereo Audio Converter (DAC) with improved 192kHz sample rate for enhanced sound reproduction
Integrated digital interpolator filter
Supports digital audio signal (Coaxial/Toslink) input and analogue audio signal (L/R) output
Accepts uncompressed digital stereo audio input
Accepts 16 or 24bit: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates 

Model Code: AU-D3-192
Retail: R 1 550.00

CYP DAC/ADC Bi-directional AU-D9

CYP Bi-directional Audio Converter
The AU-D9 is a versatile audio converter allowing users to convert analogue audio into digital or digital audio into analogue. It can simultaneously output in all 3 audio formats without any signal loss. 

Specification:
Bi-directional Digital/Analogue Audio Converter
Three-way conversion; Coaxial to Optical & Analogue, Optical to Coaxial & Analogue, and Analogue to Optical & Coaxial
Integrated digital interpolator filter and Digital-to-Analogue Converter (DAC)
Supports 2 phono stereo, digital co-axial and digital optical signal inputs.
Supports sample rates from 16 to 100kHz
Simultaneously outputs digital coaxial, digital optical and 2 phono stereo audio signals
Provides electromagnetic-noise-free transmission
Inputs1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
2x RCA [1x Analogue Stereo (L/R)]
Outputs1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
2x RCA [1x Analogue Stereo (L/R)]
PSU:5V/1.2A
Dimensions95mm [W] x 85mm [D] x 35mm [H]
Net Weight200g
Gross Weight420g

Model Code: AU-D9
Retail: R 3 100.00

CYP Digital Audio Extender PU-304-KIT

The PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.

Specifications:
Supports Coaxial or Optical digital audio SPDIF signals.
Supports Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus).
Supports sample rate up to 96kHz.
Dual transmission 1 x Coaxial and 1 x Optical
Signals can be extended over single CAT5e/CAT6 up to 150m 

Model Code: PU-304-KIT
Retail: R 3 300.00

CYP Extenter Set PU-IR01-KIT IR CAT5e/6

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment. 

Specifications:
Supports five outputs (two from the repeater, three from the extender)
Control source equipment from a distance of up to 250 metres away, via CAT5/6 cable
Transmits infrared signals only
Allows the use of existing remote controls
IR Receiver's frequency is at 20~60 kHz

Model Code: PU-IR01-KIT
Retail: R 2 835.00

CYP HDCP Colur Bandwidth Converter HDMI

The XA-HDCP is designed to enable installers to manage HDCP (High-Bandwidth Definition Content Protection) signals. Since the introduction of HDCP2.2, which is not backwards compatible with previous versions, installers face the challenge of managing copy protected content to allow AV signals to be integrated into any AV system. This device converts HDCP2.2 signals to a lower HDCP format enabling AV content to be easily integrated into a system which uses non-HDCP2.2 compliant devices, thus eliminating the need to upgrade all devices in the signal path to be HDCP2.2 compliant.

In addition to converting HDCP signals, the XA-HDCP can also analyse the content bandwidth, HDCP, EDID and Colourspace status of the inputted signal. Further features include the ability to upload EDID settings to a PC application which allows the user to create alternative EDID settings for specific applications. In addition, the XA-HDCP also acts as a HDMI repeater which equalises and recovers TMDS data before re-transmitting, thus ensuring optimal quality regardless of the incoming signal. This equalisation and repeater function enables the HDMI cable distance to be extended 5m from the output at full 4K (6G) resolution.

Control is via the direct selection keys, which allow easy switching between modes, and status LED's provide 'at-a-glance' viewing of the device status.

Specifications:
HDMI 2.0, HDCP 2.2, HDCP1.4 and DVI compliant
Supports input source and output display signal analysis up to 6G 4K2K
Supports bandwidth down converting from 6G to 3G
Supports EDID signal management from internal, external, and user’s EDID to be inserted
Supports application control via USB
Supports LED status display
Supports USB firmware update

Model Code: XA-HDCP
Retail: R 3 265.00

CYP HDMI Splitter PU-1H3HBTE (100m)

CYP 1 HDMI to 3 HDBaseT Splitter (100m)
The PU-1H3HBTE enables a single HDMI source input to be distributed to 3 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H3HBTE can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more. 

The PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device. 

Specifications:
Supports all v1.4 HDMI resolutions including 4k.
HDMI, HDCP, & DVI compliant
Supports HDMI / LAN / PoC (Power over Cable) / IR
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Supports HDCP repeating and CEC functions
Additional HDMI bypass output provided to improve flexibility
Supports 1080p distances up to 100 meters through CAT5e/6 cables
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
Supports 3D signals
Supports 4K/2K & 4K UHD - CAT5e/6 = 70m & CAT6a/7 = 100m
Inputs:1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x RJ45 [1x LAN Serving]
Outputs:1x HDMI [1x HDMI Uncompressed AV and Data]
3x RJ45 [3x HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU:24V/2.7A
Dimensions:145mm [W] x 200mm [D] x 30mm [H]
Net Weight:580g
Gross Weight:720g

Model Code: PU-1H3HBTE
Retail: R 17 000.00

CYP HDMI Splitter PU-1H3HBTPL (60m)

The PU-1H3HBTPL enables a single HDMI source input to be distributed to 3 HDBaseT™ Lite outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H3HBTPL can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens. 

PU-515PL-RX receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device. 

Specifications:
Supports all v1.4 HDMI resolutions plus 4K
HDMI, HDCP, & DVI compliant
Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports HDCP repeating and CEC functions
Supports 1080p distances up to 60 meters through CAT5e/6 cables
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
Supports HDMI and IR
Supports 3D signals
Supports PoC (Power over Cable) providing power for the receivers
Supports 4K/2K & 4K UHD - CAT5e/6 = 35m & CAT6a/7 = 40m

Model Code: PU-1H3HBTPL
Retail: R 13 600.00

CYP HDMI Splitter PU-1H7HBTE (100m)

CYP 1 HDMI to 7 HDBaseT Splitter (100m)
The PU-1H7HBTE enables a single HDMI source input to be distributed to 7 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR signals over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H7HBTE can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more. 

PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device. 

Specifications:
Supports all v1.4 HDMI resolutions plus 4K
HDMI, HDCP, & DVI compliant
Supports HDMI / LAN / PoC (Power over Cable) / IR
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Additional HDMI bypass output provided for increased flexibility
Supports HDCP repeating and CEC functions
Supports 1080p distances up to 100 meters through CAT5e/6 cables
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
Supports 3D signals
Supports 4K/2K & 4K UHD - CAT5e/6 = 70m & CAT6a/7 = 100m
Inputs:1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x RJ45 [1x LAN Serving]
Outputs:1x HDMI [1x HDMI Uncompressed AV and Data]
7x RJ45 [7x HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
POE PSU:24V/6.25A
PSU:24V/6.25A
Dimensions:430mm [W] x 180mm [D] x 40mm [H]
Net Weight:2140g
Gross Weight:3800g

Model Code: PU-1H7HBTE
Retail: R 48 550.00

CYP HDMI Splitter PU-1H7HBTPL (60m)

The PU-1H7HBTPL enables a single HDMI source input to be distributed to 7 HDBaseT™ Lite with PoC outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H7HBTPL can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens. 

PU-515PL-RX Receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device. 

Specifications:
Supports all v1.4 HDMI resolutions plus 4K
HDMI, HDCP, & DVI compliant
Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports HDCP repeating and CEC functions
Supports 1080p distances up to 60 meters through CAT5e/6 cables
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
Supports HDMI / IR
Supports 3D signals
Supports PoC (power over cable) providing power for the receivers
Supports 4K/2K & 4K UHD - CAT5e/6 = 35m & CAT6a/7 = 40m

Model Code: PU-1H7HBTPL
Retail: R 30 400.00

CYP HDMI Splitter PU-Q1H8CS

The PU-Q1H8CS has 1 HDMI input and 8 Single CAT6 outputs to simultaneously distribute a HDMI source to eight displays up to a distance of 40m. This solution is perfect for distributing the HDMI source content over longer distances than is usually achievable with HDMI cable, using cost effective CAT6 cable infrastructure. 
Use the PU-107RX Single CAT6 to HDMI Receivers on each of the eight CAT6 outputs to convert back from CAT6 to HDMI for connection to the display/s.

Specifications:
v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant
1 to 8 HDMI to single CAT6 splitter
Resolutions supported: PC - VGA to WUXGA; HDTV - 480i to 1080p plus 1080p24fps
High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM
CAT output can run up to 40m @ 1080p, 8 bit
Selectable EDID settings - TV (downstream) or STD (fixed) and 12 bit or 8 bit Deep Colour
Supports ‘Deep Colour’ (10 & 12 bit)
Supports 3D signals

Model Code: PU-Q1H8CS
Retail: R 9 725.00

CYP HDMI Switcher EL-21SY (2-Way)

The EL-21SY switcher accepts two HDMI inputs and allows the user to switch between two input sources to provide a single HDMI output for connection to the HDMI display. This switcher has an auto-detect function which will switch the unit when a source which is powered ‘On’. Alternatively, the input can be selected manually using the input selection button on the device.

Specifications:
v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant
HDMI 2-way Switcher
Resolutions Supported : PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200). HDTV - 480i, 576i, 480p, 576p, 720p, 1080i, 1080p and 1080p24fps
High Definition Audio supported - Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM
Auto signal enhancement feature can improve signal quality after long distance transmission
Auto-switch design
Supports 'Deep Colour' (10, 12, & 16 bit)
LED indicators
Supports xvYCC
Supports 3D signals 

Model Code: EL-21SY
Retail: R 1 660.00

CYP HDMI Switcher EL-31Y (3-Way)

The EL-31SY switcher allows the user to input three HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher can be controlled via the supplied remote control or by using the input switching button on the front of the device.

Specifications:
v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant
HDMI 3-way Switcher
Resolutions Supported: PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200). HDTV - 480i, 576i, 480p, 576p, 720p, 1080i, 1080p and 1080p24fps.
High Definition Audio supported - Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM
Auto signal enhancement feature can improve signal quality after long distance transmission
IR Remote Control
Supports 'Deep Colour' (10, 12 & 16 bit)
LED indicators
Supports xvYCC
Supports 3D signals 

Model Code: EL-31SY
Retail: R 2 620.00

CYP MA-421 Mini Matrix KIT (including HDMI cables)

This kit includes:
4x Soundlab Clear HDMI S2 18g 1M
2x Soundlab Clear HDMI S2 18g 2M
1x Soundlab Clear HDMI S2 18g 5M
1x CYP MA-421
1x CYP PUV1710RX

Model Code: MA-421KIT
Retail: R 35 650.00
View Bundle Products

CYP Matrix 10x10 PUV-1082PL-4K22 4K(60m)

The PUV-1082PL-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 10 HDMI sources to 8 HDBaseT outputs and 2 independent HDMI2.0 outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-1082PL-4K22 matrix incorporates an independent audio matrix with 14 audio outputs and 10 audio inputs. These outputs and inputs can also be used for de-embedding HDMI audio to the audio outputs and embedding audio to the HDBaseT and HDMI outputs. The audio CAT connections, along with compatible bi-directional audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones. In addition, volume, mute, treble, bass and audio lip-sink correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX receiver to be routed back to the audio matrix.
The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 10 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers. The PUV-1082PL-4K22 is designed to be used with PUV-1230PL-RX or PUV-1210PL-RX receivers that can utilise the PoH capabilities of the matrix.

Specifications:
HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
Routes ten HDMI sources to ten displays using eight HDBaseT outputs and two independent HDMI outputs
High-Definition video and audio, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports resolutions up to 4K@60 (RGB 4:4:4) on HDMI output ports
Supports automatic 4K@60 RGB 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 40m via CAT6a/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, and fully independent audio only zones
Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
Supports on-board audio over CAT inputs and outputs for transmission up to 150m
Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
Optical Audio Return (OAR)
Advanced internal and external EDID management with 4 sets of configurable EDID settings
Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
Supports HDCP repeating and CEC functions
Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
2U rack mounted design

Model Code: PUV-1082PL-4K22
Retail: R 155 350.00

CYP Matrix 4x6 PUV-442-4K22 HDMI HDBaseT

The PUV-442-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-442-4K22 matrix incorporates an independent audio matrix with 6 audio outputs and 4 audio inputs. These outputs and inputs can be used for de-embedding HDMI audio to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs. In addition, volume, mute, treble, bass and audio lip-sink correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1530PL-RX receiver to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or games consoles in every zone. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers.
The PUV-442-4K22 is designed to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH capabilities of the matrix. 

Specifications:
HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
Routes four HDMI sources to six displays using six HDBaseT outputs and two independent HDMI outputs
HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports resolutions up to 4K@60 (RGB 4:4:4) on HDMI output ports
Supports automatic 4K@60 RGB 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, and fully independent audio only zones
Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
Optical Audio Return (OAR)
Advanced internal and external EDID management with 4 sets of configurable EDID settings
Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
Supports HDCP repeating and CEC functions
Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
1U rack mounted design

Model Code: PUV-442-4K22
Retail: R 86 750.00

CYP Matrix 6x8 PUV-662PL-4K2 HDBaseT 60m

The PUV-662PL-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources to 6 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-662PL-4K22 matrix incorporates an independent audio matrix with 8 audio outputs and 4 audio inputs. These outputs and inputs can be used for de-embedding HDMI audio to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs. In addition, volume, mute, treble, bass and audio lip-sink correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX receiver to be routed back to the audio matrix.
The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 8 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers.
The PUV-662PL-4K22 is designed to be used with PUV-1230PL-RX or PUV-1210PL-RX receivers that can utilise the PoH capabilities of the matrix.

Specifications:
HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
Routes six HDMI sources to eight displays using six HDBaseT outputs and two independent HDMI outputs
High-Definition video and audio, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports resolutions up to 4K@60 (RGB 4:4:4) on HDMI output ports
Supports automatic 4K@60 RGB 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 40m via CAT6a/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, and fully independent audio only zones
Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
Optical Audio Return (OAR)
Advanced internal and external EDID management with 4 sets of configurable EDID settings
Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
Supports HDCP repeating and CEC functions
Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
2U rack mounted design

Model Code: PUV-662PL-4K22
Retail: R 119 300.00

CYP Matrix 8x8 PU-8H8HBTPL-4K2 (100m)

The 4K2K 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD, HDCP 2.2), multi-channel digital audio from 8 HDMI sources to 8 HDBaseT LITE outputs via single CAT5e/6/7 cable up to 60m. The matrix is compatible with high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. 
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through to the receivers.
The PU-8H8HBTPL-4K22 is designed to be used with PU-515PL-RX & PU-515PL-WPRX receivers.

Specifications:
HDCP 2.2 Compliant
Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Uncompressed video/audio up to 10.2Gbps
LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 40m via CAT6a/7
1080p signals can be transmitted up to 60m via CAT5e/6/6a/7
PoC (Power over Cable) feature available on compatible receivers only
Features bi-directional IR from input and output locations
The PU-8H8HBTPL-4K22 can be controlled via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
2U Size Design
Supports external and internal EDID settings

Model Code: PU-8H8HBTPL-4K2
Retail: R 108 250.00

CYP Matrix Kit 4x4 PU-44XL-KIT (60m)

This 4 by 4 HDMI HDBaseT™ Lite Matrix Express Installation Kit has been developed as a robust and cost effective solution at the heart of any four zone multi-room environment. Supplied complete with a HDBaseT™ Lite Matrix plus four PU-514L-RX receivers, the kit enables an installer to easily and confidently configure a 4-zone multi-room AV system using HDBaseT Lite technology and distribute content throughout the system over a Single CAT5e/6/7 cable infrastructure.

The Express Install Kit supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel digital audio, and control via IR, RS-232, or Web GUI/Telnet IP, from four high definition sources to four HDBaseT outputs over a single CAT5e/6/7 cable (up to 60m) for each output.

The PU-44XL-KIT is supplied with 4x PU-514L-RX receivers which utilise the 2-way IR control capabilities of the matrix. Utilise the USB power output from a TV as an optional way of powering the PU-514L-RX receiver unit alternative to a mains power supply.

Use the IP control feature to enable users to access and control the matrix remotely and also allow additional options for integration of third-party control systems. CYP provide control drivers for control systems such as Control 4, RTI, Crestron, AMX, and Control FX. These are available at no extra cost. 

Specifications:
Supports all v1.3 HDMI resolutions
Supports uncompressed video/audio up to 10.2Gbps
Common supported resolutions : HDTV: 480p, 576p, 720p, 1080i, 1080p, 1080p24; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA.
HDMI, HDCP and DVI complaint
High Definition Audio supported : Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz)
Uncompressed data transfer over single CAT cable (60m - CAT5e/6/7)
Supports third-party control systems, with drivers available for : Control FX, AMX, Crestron, RTI, Control 4
Supports HDMI input up to 15m 1080p 8bit or 10m 1080p 12bit.
Supports RS-232, 2-Way IR and Manual Selection Buttons
Selectable EDID settings - TV (downstream) and STD (fixed)
Compact 1U Rack mount design
Supports 3D signals
Supports additional IR Control via a master (ALL) Input/Output
Supports full IP control
Supplied with 4x PU-514L-RX receivers
Choose to power the PU-514L-RX via the USB output from a TV (Cable available separately - APC-USB) : * Please note the performance and consistency of USB power outputs from TV's can vary and cannot be guaranteed by CYP.

Model Code: PU-44XL-KIT
Retail: R 32 950.00

CYP Matrix Kit 4x4 PUV-44XPL-AVLC

he PUV-44XPL-AVLC is the next generation of 4 x 4 matrices from CYP, taking much of its heritage from the successful PUV-44XPL-4K22. The Matrix supports the transmission of video (resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT outputs. Despite the 10.2Gbps limitation of HDBaseT™ technology, this groundbreaking product enables data rates of up to 18Gbps to be transmitted using AVLC (Adaptive Visually Lossless Compression) Technology. The transmitter enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (Including Dolby Vision) to be extended to a compatible receiver included in the kit. The result is a perfect 4K 6G visually lossless image delivered to the display screen.

The PUV-44XPL-AVLC supports independent video output scaling on two of the HDBaseT outputs. This is particularly useful when transmitting a 4K HDR image from the matrix to a standard 1080p HD display within an AV setup.

The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m (40m HDR Content). This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.

This matrix also features audio breakout whereby de-embedded analogue L/R audio outputs are provided for each of the HDBaseT zones (A to D). The Power over HDBaseT (PoH) function provides power to the supplied PUV-1710LRX-AVLC receivers which also support 2-way IR and RS-232 pass-through. 

Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all major control systems.

Model Code: PUV-44XPL-AVLC
Retail: R 59 990.00

CYP Mini Matrix 4x2+1 M-421

Introducing the Brand New MA-421, the perfect AV distribution solution for apartments and small residential installations or even family homes. Offering four HDMI inputs, one HDBaseT output, one HDMI with mirrored HDBaseT output, 20w power amplifier and app control, the MA-421 is our latest AV Distribution Matrix and the first to feature our new CYP Control app. 

Included in the system is a compatible PUV-1710LRX-AVLC Receiver, giving you instant flexibility to add a second zone to your system.

Small enough to be placed in an AV cabinet, the MA-421 has been designed for simplicity. Our AVLC (Adaptive Visually Lossless Compression) technology ensures full 4K60 and 4K HDR/Dolby® Vision compatibility out to both HDBaseT outputs, whilst the on-board amplifier adds sound reinforcement by using the ARC audio return pathway to pull the audio signal back from the connected TV to the built-in amplifier and line output, the perfect partner with any soundbar or bookshelf speakers you way wish to use! 

Any of the three outputs can be scaled to accommodate a 1080p display that might be included in your home set up! IR control with learning function (RS-232 and WebGUI is also available) enables it to be used with a programmable remote control. To further enhance the user-experience, our new CYP Control app can be programmed with all sources and display device controls, offering a single universal remote control for the whole system.

Specifications:
HDBaseT feature support: HD Video and Audio, 48V PoH and Control (bi-directional IR pass-through)
Supports up-to 4K UHD (18Gbps, 4K @50/60Hz 4:4:4 8-bit) video input
AVLC (Adaptive Visually Lossless Compression)
Supports 10-bit and 12-bit HDR (High Dynamic Range)
Supports output resolutions up to 4K @50/60Hz (4:4:4 8-bit)
Supports Deep Colour input and output up to 12-bit
Supports CEC Bypass
4K 3G Timings and 1080p up-to 70 Metres, 4K 6G Timings upto 35 Metres
IOS & Android
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports 3D signals
Individual output scaling on HDMI & HDBaseT Outputs down to 1080p
CYP Control APP
IR Learning and remote control programming
2 x 20w D Class Power Amplifier
3.5mm Line Level Output

Inputs
4x HDMI [4x HDMI Uncompressed AV and Data]
1x 9pin Dsub [1x RS-232 Data]
1x RJ45 [1x IP Control]
Outputs1x HDMI [1x HDMI Uncompressed AV and Data]
2x RJ45 [2x HDBaseT HDMI & Propriety Data]
5x 3.5mm Stereo mini-jack [5x Infra Red Emitter]
2x Phoenix (2 pin) [1x Speaker Level Stereo Output]
1x 3.5mm Stereo mini-jack [1x Analogue audio Stereo(L/R)]

PSU:24V/2.7A
Dimensions:219mm [W] x 156mm [D] x 43mm [H]
Net Weight:1300g
Gross Weight:2200g

Model Code: MA-421
Retail: R 32 100.00

CYP Receiver PU-1107RX Digital HDMI CAT6

The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters' single CAT6 outputs, back to HDMI for connection to your displays.

Specifications:
v1.3 HDMI, HDCP 1.1, DVI 1.0 compliant
Pure digital v1.3 HDMI over single CAT6 Receiver
Resolution supported : HDTV - 480i to 1080p plus 1080p 24fps.
Resolution supported : PC - VGA to WUXGA
High Definition Audio supported : Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM.
Supports CEC bypass
Supports xvYCC
Equalises and recovers incoming TMDS data before re-transmitting to ensure optimum signal quality.
Supports Deep Colour : 10 and 12 bit
Supports 3D signals

Model Code: PU-1107RX
Retail: R 2 450.00

CYP Receiver PU-507RX HDBaseT (100m)

The PU-507RX Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. 

Specifications:
HDCP 2.2 Compliant
Supports all v1.4 HDMI resolutions plus 4k.
Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
HDMI, HDCP, & DVI compliant
Supports HDCP repeating and CEC functions
Supports 1080p distances up to 100 meters through CAT5e/6 cables
Uncompressed video 1080p, 60Hz, 48bits
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
5-Play™ convergence: HDMI, LAN, PoC & Control (IR & RS232)
Supports 3D signals
Supports 4K/2K & 4K UHD - CAT5e/6 = 70m & CAT6a/7 = 100m?

Model Code: PU-507RX
Retail: R 6 625.00

CYP Receiver PU-514L-RX HDBaseT (60m)

CYP PU-514L-RX HDBaseT LITE Receiver
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering the PU-514L-RX receiver unit alternative to a mains power supply.

Compatible devices: 
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL

Specific feature compatibility may vary dependant on the transmission device.

Specification:
HDCP 2.2 Compliant
HDMI 1.4 with 3D, 4K×2K support, HDCP and DVI compliant
Supports HDMI 1.4 (including HDCP) over a single CAT5e/6/7 up to 60m
HDBaseT Lite - 4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 40m via CAT6a/7
Complies with HDBaseT™- Lite specifications
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
Supports HDMI output up to 15m with 8/12-bit deep colour
Supports 2-way IR Control
Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
Choose to power the PU-514L-RX via the USB output from a TV (Cable available separately - APC-USB) : * Please note the performance and consistency of USB power outputs from TVs can vary and cannot be guaranteed by CYP.
Inputs1x RJ45 [1x HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
Outputs1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU:5V/2.6A
Dimensions55mm [W] x 52mm [D] x 22mm [H]
Net Weight60g
Gross Weight140g

Model Code: PU-514L-RX
Retail: R 3 530.00

CYP Receiver PU-515PL-RX HDBaseT (60m)

The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of  60 metres.

Specifications:
HDCP 2.2 Compliant
HDMI 1.4 with 3D, 4K×2K support, HDCP and DVI compliant
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 40m via CAT6a/7
Supports HDMI 1.4 (including HDCP) over a single CAT5e/6/7 up to 60m
Complies with HDBaseT™- Lite specifications
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
HDMI input up to 15m with 8-bit deep colour, or 10m with 12-bit deep colour
Supports HDMI output up to 15m with 8/12-bit deep colour
Supports two-way IR, RS-232 Control, and Power Over Cable (PoC)
Supports High Definition LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission 

Model Code: PU-515PL-RX
Retail: R 4 485.00

CYP Receiver PUV-1210PL-RX HDBaseT (60m)

The PU-1210PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.

Specifications:
HDCP2.2 Compliant
High-Definition video and audio, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 60m via CAT6a/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports HDCP repeating and CEC functions
Supports 3D signals

Model Code: PUV-1210PL-RX
Retail: R 5 555.00

CYP Receiver PUV-1230PL-RX HDBaseT (60m)

The PU-1230PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.

Specifications:
HDCP2.2 Compliant
High-Definition video and audio, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 60m via CAT6a/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Optical Audio Return (OAR)
Supports HDCP repeating and CEC functions
Supports 3D signals

Model Code: PUV-1230PL-RX
Retail: R 7 585.00

CYP Receiver PUV-1510RX HDBaseT (100m)

The PUV-1510RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.

Specifications:
HDCP2.2 Compliant
Supports uncompressed video/audio up to 10.2Gbps
Supports HDCP repeating and CEC functions
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
1080p signals can be transmitted up to 100m via CAT5e/6/6a/7
Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
5-Play™ convergence: HDMI, LAN, PoH & Control (IR & RS232)
Supports 3D signals

Model Code: PUV-1510RX
Retail: R 6 945.00

CYP Receiver PUV-1530RX HDBaseT (100m)

The PU-1530RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.

Specifications:
HDCP2.2 Compliant
HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Optical Audio Return (OAR)
Supports optical sampling rate up to 48kHz
Supports HDCP repeating and CEC functions
Supports 3D signals

Model Code: PUV-1530RX
Retail: R 8 655.00

CYP Receiver PUV-1710LRX HDBaseT (60m)

CYP PUV-1710LRX-AVLC-HDBaseTLite Rec-60m???
The new PUV-1710LRX-AVLC Receiver enables video resolutions up to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT™) signals from a distance of 70m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 70m.

Despite the 10.2Gbps limitation of HDBaseT technology, this groundbreaking product enables data rates of up to 18Gbps to be received using AVLC (Adaptive Visually Lossless Compression) Technology. The receiver enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (Including Dolby® Vision) to be received over distance from a compatible transmitter. The result is a perfect 6G 4K visually lossless image delivered to the display screen.

Specification:
Supported HDBaseT feature set: HD Video & Audio, 48V PoH, and Control (Bi-directional IR/RS-232 pass-through)
Supports up-to 4K UHD (18Gbps, 4K @50/60Hz 4:4:4 8-bit) video output
AVLC (Adaptive Visually Lossless Compression)
AVLC Features manual selection between High Quality and Standard compression from TX (Useful for longer cable runs)
Supports 10-bit and 12-bit HDR (High Dynamic Range)
Supports output resolutions up to 4K @50/60Hz (4:4:4 8-bit)
Supports Deep Colour input and output up to 12-bit
Supports CEC Bypass
4K 3G Timings and 1080p up-to 70 Metres, 4K 6G Timings upto 35 Metres
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports 3D signals
Inputs1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
Outputs1x HDMI [1x HDMI Uncompressed AV and Data]
1x 9pin Dsub [1x RS-232 Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
POE PSU:PoH
Dimensions116mm [W] x 128mm [D] x 16mm [H]
Net Weight357g
Gross Weight572g

Model Code: PUV-1710LRX
Retail: R 8 655.00

CYP Receiver PUV-1810RX HDBaseT

CYP PUV-1810RX-AVLC 5-Play HDBaseT Receiver
The new PUV-1810RX-AVLC Receiver enables video resolutions up to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) and LAN signals from a distance of 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 70m.

Despite the 10.2Gbps limitation of HDBaseT™ technology, this groundbreaking product enables data rates of up to 18Gbps to be received using AVLC (Adaptive Visually Lossless Compression) Technology. The receiver enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (Including Dolby Vision) to be received over distance from a compatible transmitter. The result is a perfect 6G 4K visually lossless image delivered to the display screen.

Specifications:
HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
Supports up-to 4K UHD (18Gbps, 4K @50/60Hz 4:4:4 8-bit) video output
AVLC (Adaptive Visually Lossless Compression)
AVLC Features manual selection between High Quality and Standard compression from TX (Useful for longer cable runs)
Supports 10-bit and 12-bit HDR (High Dynamic Range)
Supports output resolutions up to 4K @50/60Hz (4:4:4 8-bit)
Supports Deep Colour input and output up to 12-bit
Supports CEC Bypass
4K 3G Timings and 1080p up-to 100 Metres, 4K 6G Timings upto 70 Metres
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
Supports 3D signals
Inputs1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
Outputs1x HDMI [1x HDMI Uncompressed AV and Data]
1x 9pin Dsub [1x RS-232 Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x RJ45 [1x LAN Serving]
POE PSU:PoH
Dimensions116mm [W] x 128mm [D] x 16mm [H]
Net Weight357g
Gross Weight572g

Model Code: PUV-1810RX
Retail: R 8 655.00

CYP RE-EDID HDMI EDID Manager

The RE-EDID is designed to allow the adjustment and manipulation of HDMI/DVI EDID information that is provided to a source device by a connected display so that it may output the correct video/audio signal. Aiming to simplify the technical complications involved in video/audio system integration, home theatre installation, and video/audio equipment testing, the unit features a learning function allowing the user to Read and Write the video/audio EDID to the system. It also supports EDID Emulation and Bypass modes. This device is perfect to overcome source and screen compatibility issues, particularly when integrating PC's into an AV system.

Specifications:
HDMI 1.3 and DVI 1.0 compliant
Supports resolutions up to and including 1080p @ 60Hz, 4K x 2K @ 24/30Hz and 1920x1200 60Hz (WUXGA)
Supports up to 16-bit Deep Colour
HD Audio Support : LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS HD Master Audio (Sampling rates from 32 kHz to 192 kHz)
Supports Four different EDID modes : Read / Write / Emulate / Bypass modes
Read Mode : Reads the TV/display’s EDID information
Write Mode : Overwrites the TV/display’s EDID information (TV/display needs to be able to support overwrite function)
8 unique sets of EDID settings may be stored via the learning procedure.
Emulator Mode : Allows the source device to read the selected EDID information from the unit’s default or learnt EDID memory
Bypass Mode : Allows the source device to read the EDID information from the TV/display directly
Can be powered via USB or HDMI input
Supports DVI sources when used with a DVI to HDMI adaptor (not supplied)
Supports CEC functionality 

Model Code: RE-EDID
Retail: R 3 200.00

CYP Repeater PU-HBT-EX HDBaseT ( 100m)

The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional control systems (IR & RS-232), Power over Cable (PoC), and Ethernet (for LAN serving & IP Control). This Repeater is designed to be used with the PU-507 and PU-1109 point-to-point Extender Kits, the PU-8H8CTX & PU-8H8CTXIR 8-Way Transmitters, and with any CYP full HDBaseT™ Matrix system (PU-8H8HBT / PU-8H8HBTE / PU-4H4HBT). 

When combined with CYP HDBaseT™ distribution solutions, this Repeater gives any installer the ability to send Audio, Video, PoC, and Control signals reliably up to 200m. The PU-HBT-EX can also be cascaded twice to achieve a maximum of 300m transmission distance. 

Specifications:
Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
HDMI, HDCP and DVI compliant
High Definition Audio supported : Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz)
Supports RS-232, 2-Way IR, and HDMI CEC control pass through
Full 5-Play™ Convergence - HDMI, LAN, PoC, & Control (RS-232 & IR)
Supports 3D signals
Supports LAN serving to all connected zones

Model Code: PU-HBT-EX
Retail: R 9 835.00

CYP RE-PI HDMI Power Inserter

The RE-PI Power Inserter ?is used to insert power into a HDMI signal path for self-powering compatible HDMI products. This device is the perfect partner to the CYP RE-HDEQ HDMI Equaliser, for use when the HDMI source is not capable of sending power to the Equaliser. The RE-PI is capable of inserting up to 5V/2A into the HDMI signal path and the connected device may draw power up to this rating.

Specifications:
Power insertion (up to 5V/2A)
Provides extra power to HDMI output while disabling any power supplied from the HDMI input without interrupting the original HDMI signal
Integrated over-current protection 

Model Code: RE-PI
Retail: R 700.00

CYP RS-232 Control Extender Set PU-22

The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 meters. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.

Specifications:
Extends any RS-232 compliant device up to 250 metres from the source to display
Requires only one CAT5/6 cable
Perfect for digital signage applications
Baud Rate: 110~921600. Data bit: 8bit
Simple installation and operation

Model Code: PU-232
Retail: R 1 765.00

CYP Stereo Lip Sync Corrector AU-D18

The AU-D18 analogue stereo Lip Sync Corrector is a small device for correcting audio lip sync issues. This solution features a manually adjustable timing selector dial which can be adjusted so that the users may fine tune the timing of the audio so that it is in sync with the video signal, overcoming any annoying sound mismatch to the display or amplifier.

Specifications:
Lip Sync corrector with adjustable delay between 0 & 300ms
Sample Rate: 48 kHz
Compatible with a 2 Phono stereo audio signal
Up to 24 bit audio resolution
Adjust analogue audio signal timing to compensate for video signal delays in AV system

Model Code: AU-D18
Retail: R 1 915.00