Buy Now  Request a Demo

Showing 12 products

  • Default sorting
  • Sort by popularity
  • Sort by average rating
  • Sort by newness
  • Sort by price: low to high
  • Sort by price: high to low
  • No results match your keyword.

CYP 20m Fiber AOC HDMI Cable, 18Gbps (6G

Introducing the latest in HDMI cable technology, the CYP HDMI-AOC-20M fiber cable. AOC (Active Optical Cable) allows full 4K UHD resolution support (2160p @ 60hz) to be transmitted over 20 metres. This technology accepts the same electrical inputs as a traditional copper HDMI cable, but uses optical fiber between the connectors. AOC uses electrical to optical conversion over the directional cable ends to improve distance performance, without sacrificing any signal integrity.

The low profile cast connectors allow for easy installation of the HDMI cable and offer a secure connection to the connected source and display. The cable also offers increased flexibility and durability with its slimline narrow rubber cord. *Taking it's power from the 5V pin of the connected source, the HDMI-AOC-20M doesn't require an additional power supply to operate.

*Please note - The HDMI-AOC-20M is a directional cable and needs to be installed following the correctly labelled 'TV' & 'Source' connectors in the correct position

Full 4k / UHD resolution support (2160p @ 60Hz 4:4:4)
HDR (High Dynamic Range) support
High quality low profile cast metal connectors with precision 24k gold plated termination
Clearly labelled 'Source' & 'Display' connectors for providing power to the cable
High Frame Rate (600MHz)
High Bandwidth (full 18 Gbps)
BT.2020 Colorimetry (10/12 bit / 4:4:4)
ARC (Audio Return Channel) support
CEC (Consumer Electronic Control) support
32 Channel Audio (Dolby Atmos and DTS:X) support
Full High Definition 3D support
HDCP2.2 compliant

Inputs1x HDMI [1x HDMI Uncompressed AV and Data]
Outputs1x HDMI [1x HDMI Uncompressed AV and Data]
Dimensions20000mm [W] x 14mm [D] x 6mm [H]
Net Weight200g
Gross Weight600g

Model Code: HDMI-AOC-20M
Retail: R 8 990.00

CYP Audio De-Embedder 4K AU-1H1DD-4K22

The AU-1H1DD-4K22 is an advanced solution for de-embedding and down-mixing audio signals from the HDMI input (up to Dolby® Digital and DTS® 2.0+Digital Out). Connect the AU-1H1DD between the source and your display via HDMI, and select 2CH LPCM or bypass. The digital audio outputs can be set to either 2CH LPCM or bypass. The L/R analogue outputs will always output down-mixed stereo (with audio up to Dolby® Digital and DTS® 2.0+Digital Out). This device supports the latest 4K2K resolutions, HDMI2.0 and HDCP2.2 for stunning results. 

HDCP 2.2, HDMI2.0, and DVI compatible
Built-in Dolby Digital Decoder
Built-in DTS 2.0+Digital Out Decoder
Integrated digital interpolator filter and Digital-to-Analog Converter (DAC)
Supports HDTV resolutions up to 4K2K: 3840×2160@24/25/30Hz, 4096×2160@24/25/30Hz, 3840×2160@50/60Hz (YUV444) & 4096×2160@50/60 (YUV444)
Supports simultaneous audio outputs on HDMI, analogue L/R, Coaxial and Optical
Supports Dolby Digital sampling rates up to 48kHz
Supports DTS sampling rates up to 96kHz
Supports LPCM input sampling rates up to 96kHz
Supports coaxial and optical output audio sampling rates up to 96kHz
Supports up to 3m HDMI cables on input & output

Model Code: AU-1H1DD-4K22
Retail: R 10 800.00

CYP Audio De-Embedder 5.1 AU-11CD

The AU-11CD is an advanced solution for repeating HDMI with integrated Audio de-embedding, up to 5.1. Connect the AU-11CD between your source and display via HDMI, and select the audio format required.

Compliant with v1.3 HDMI, HDCP 1.2 and DVI 1.0
Supports HDMI Sample Rates up to 192 kHz
Supports Optical Sample Rate up to 48 kHz
Supports TMDS clock frequency rate 225MHz
Supports high-bit-rate (HBR) audio
Supports resolutions of 1080P up to cable lengths of 10m either side of the device
Supports built-in audio EDID switch of LPCM2, 5.1/7.1 or Bitstream
Supports 3D signals 

Model Code: AU-11CD
Retail: R 4 000.00

CYP Coax to Toslink Converter AU-D2

Digital Audio Coaxial to Tosling Convert
The AU-D2 is a versatile digital audio converter, either coaxial to optical or optical to coaxial.  Simply select one of the digital audio inputs for two identical audio signals in both output formats.

Digital Audio Coaxial/Optical bi-directional Converter
Two-way conversion; Coaxial to Optical or Optical to Coaxial
Re-clocking function enables the use of extended cable distances
Inputs accept audio signals from 2-channel PCM to 5.1. Output signal follows input signal
Select between input ports, and distribute the audio signal to both Coaxial and Optical output ports simultaneously
Inputs1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
Outputs1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
Dimensions58mm [W] x 46mm [D] x 24mm [H]
Net Weight160g
Gross Weight220g

Model Code: AU-D2
Retail: R 1 450.00

CYP DAC AU-D3-192 (192kHz)

The AU-D3-192 is designed to convert either Coaxial or Optical signals from a digital stereo signal to analogue stereo audio. With an advanced 192kHz sampling rate, this unit is particularly useful for enhancing sound reproduction when connecting digital sources to analogue amplifiers.

Digital Audio to Left/Right Stereo Audio Converter (DAC) with improved 192kHz sample rate for enhanced sound reproduction
Integrated digital interpolator filter
Supports digital audio signal (Coaxial/Toslink) input and analogue audio signal (L/R) output
Accepts uncompressed digital stereo audio input
Accepts 16 or 24bit: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates 

Model Code: AU-D3-192
Retail: R 1 800.00

CYP DAC/ADC Bi-directional AU-D9

CYP Bi-directional Audio Converter
The AU-D9 is a versatile audio converter allowing users to convert analogue audio into digital or digital audio into analogue. It can simultaneously output in all 3 audio formats without any signal loss. 

Bi-directional Digital/Analogue Audio Converter
Three-way conversion; Coaxial to Optical & Analogue, Optical to Coaxial & Analogue, and Analogue to Optical & Coaxial
Integrated digital interpolator filter and Digital-to-Analogue Converter (DAC)
Supports 2 phono stereo, digital co-axial and digital optical signal inputs.
Supports sample rates from 16 to 100kHz
Simultaneously outputs digital coaxial, digital optical and 2 phono stereo audio signals
Provides electromagnetic-noise-free transmission
Inputs1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
2x RCA [1x Analogue Stereo (L/R)]
Outputs1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
1x RCA [1x Coaxial DTS / Dolby Digital / 2 Channel LPCM]
2x RCA [1x Analogue Stereo (L/R)]
Dimensions95mm [W] x 85mm [D] x 35mm [H]
Net Weight200g
Gross Weight420g

Model Code: AU-D9
Retail: R 3 580.00

CYP Digital Audio Extender PU-304-KIT

The PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.

Supports Coaxial or Optical digital audio SPDIF signals.
Supports Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus).
Supports sample rate up to 96kHz.
Dual transmission 1 x Coaxial and 1 x Optical
Signals can be extended over single CAT5e/CAT6 up to 150m 

Model Code: PU-304-KIT
Retail: R 3 800.00

CYP Extenter Set PU-IR01-KIT IR CAT5e/6

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment. 

Supports five outputs (two from the repeater, three from the extender)
Control source equipment from a distance of up to 250 metres away, via CAT5/6 cable
Transmits infrared signals only
Allows the use of existing remote controls
IR Receiver's frequency is at 20~60 kHz

Model Code: PU-IR01-KIT
Retail: R 3 300.00

CYP HDCP Colur Bandwidth Converter HDMI

The XA-HDCP is designed to enable installers to manage HDCP (High-Bandwidth Definition Content Protection) signals. Since the introduction of HDCP2.2, which is not backwards compatible with previous versions, installers face the challenge of managing copy protected content to allow AV signals to be integrated into any AV system. This device converts HDCP2.2 signals to a lower HDCP format enabling AV content to be easily integrated into a system which uses non-HDCP2.2 compliant devices, thus eliminating the need to upgrade all devices in the signal path to be HDCP2.2 compliant.

In addition to converting HDCP signals, the XA-HDCP can also analyse the content bandwidth, HDCP, EDID and Colourspace status of the inputted signal. Further features include the ability to upload EDID settings to a PC application which allows the user to create alternative EDID settings for specific applications. In addition, the XA-HDCP also acts as a HDMI repeater which equalises and recovers TMDS data before re-transmitting, thus ensuring optimal quality regardless of the incoming signal. This equalisation and repeater function enables the HDMI cable distance to be extended 5m from the output at full 4K (6G) resolution.

Control is via the direct selection keys, which allow easy switching between modes, and status LED's provide 'at-a-glance' viewing of the device status.

HDMI 2.0, HDCP 2.2, HDCP1.4 and DVI compliant
Supports input source and output display signal analysis up to 6G 4K2K
Supports bandwidth down converting from 6G to 3G
Supports EDID signal management from internal, external, and user’s EDID to be inserted
Supports application control via USB
Supports LED status display
Supports USB firmware update

Model Code: XA-HDCP
Retail: R 3 850.00


The RE-EDID is designed to allow the adjustment and manipulation of HDMI/DVI EDID information that is provided to a source device by a connected display so that it may output the correct video/audio signal. Aiming to simplify the technical complications involved in video/audio system integration, home theatre installation, and video/audio equipment testing, the unit features a learning function allowing the user to Read and Write the video/audio EDID to the system. It also supports EDID Emulation and Bypass modes. This device is perfect to overcome source and screen compatibility issues, particularly when integrating PC's into an AV system.

HDMI 1.3 and DVI 1.0 compliant
Supports resolutions up to and including 1080p @ 60Hz, 4K x 2K @ 24/30Hz and 1920x1200 60Hz (WUXGA)
Supports up to 16-bit Deep Colour
HD Audio Support : LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS HD Master Audio (Sampling rates from 32 kHz to 192 kHz)
Supports Four different EDID modes : Read / Write / Emulate / Bypass modes
Read Mode : Reads the TV/display’s EDID information
Write Mode : Overwrites the TV/display’s EDID information (TV/display needs to be able to support overwrite function)
8 unique sets of EDID settings may be stored via the learning procedure.
Emulator Mode : Allows the source device to read the selected EDID information from the unit’s default or learnt EDID memory
Bypass Mode : Allows the source device to read the EDID information from the TV/display directly
Can be powered via USB or HDMI input
Supports DVI sources when used with a DVI to HDMI adaptor (not supplied)
Supports CEC functionality 

Model Code: RE-EDID
Retail: R 3 700.00

CYP Repeater PU-HBT-EX HDBaseT ( 100m)

The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional control systems (IR & RS-232), Power over Cable (PoC), and Ethernet (for LAN serving & IP Control). This Repeater is designed to be used with the PU-507 and PU-1109 point-to-point Extender Kits, the PU-8H8CTX & PU-8H8CTXIR 8-Way Transmitters, and with any CYP full HDBaseT™ Matrix system (PU-8H8HBT / PU-8H8HBTE / PU-4H4HBT). 

When combined with CYP HDBaseT™ distribution solutions, this Repeater gives any installer the ability to send Audio, Video, PoC, and Control signals reliably up to 200m. The PU-HBT-EX can also be cascaded twice to achieve a maximum of 300m transmission distance. 

Supports uncompressed video/audio up to 10.2Gbps
Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
HDMI, HDCP and DVI compliant
High Definition Audio supported : Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz)
Supports RS-232, 2-Way IR, and HDMI CEC control pass through
Full 5-Play™ Convergence - HDMI, LAN, PoC, & Control (RS-232 & IR)
Supports 3D signals
Supports LAN serving to all connected zones

Model Code: PU-HBT-EX
Retail: R 11 300.00

CYP RE-PI HDMI Power Inserter

The RE-PI Power Inserter ?is used to insert power into a HDMI signal path for self-powering compatible HDMI products. This device is the perfect partner to the CYP RE-HDEQ HDMI Equaliser, for use when the HDMI source is not capable of sending power to the Equaliser. The RE-PI is capable of inserting up to 5V/2A into the HDMI signal path and the connected device may draw power up to this rating.

Power insertion (up to 5V/2A)
Provides extra power to HDMI output while disabling any power supplied from the HDMI input without interrupting the original HDMI signal
Integrated over-current protection 

Model Code: RE-PI
Retail: R 800.00

CYP RS-232 Control Extender Set PU-22

The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 meters. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.

Extends any RS-232 compliant device up to 250 metres from the source to display
Requires only one CAT5/6 cable
Perfect for digital signage applications
Baud Rate: 110~921600. Data bit: 8bit
Simple installation and operation

Model Code: PU-232
Retail: R 2 050.00

CYP Stereo Lip Sync Corrector AU-D18

The AU-D18 analogue stereo Lip Sync Corrector is a small device for correcting audio lip sync issues. This solution features a manually adjustable timing selector dial which can be adjusted so that the users may fine tune the timing of the audio so that it is in sync with the video signal, overcoming any annoying sound mismatch to the display or amplifier.

Lip Sync corrector with adjustable delay between 0 & 300ms
Sample Rate: 48 kHz
Compatible with a 2 Phono stereo audio signal
Up to 24 bit audio resolution
Adjust analogue audio signal timing to compensate for video signal delays in AV system

Model Code: AU-D18
Retail: R 2 200.00

CYP XA-HSP HDMI Surge Protection Tool

Designed to help protect your HDMI devices, the XA-HSP is a crucial tool when installing HDMI systems in locations where there can be power fluctuations caused by unstable mains power or where the site is susceptible to earthing problems or lightning strikes. Installers feedback has identified this as an issue in some geographical locations worldwide, along with applications for test beds, outside broadcast vehicles, old buildings such as places of worship, and for marine installations to name a few examples. As a completely passive device, there is no need for a PSU to be connected and thus simply connecting the XA-HSP in-line on the HDMI signal path will protect all HDMI equipment from voltage surges.

The XA-HSP is HDCP2.2 compliant and will support 4K/UHD resolutions including HDR. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are also supported. 

HDCP1.4 and HDCP2.2 Compliant
Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30/ 50/60 YUV_420 & 4096x2160@24/25 YUV_420).
Supports bypass of high resolution digital audio formats including LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sink +5V protection
HDMI Cable lengths of up to 5m either side of the device is supported
Supports CEC bypass
Passive device (no PSU required)

Model Code: XA-HSP
Retail: R 1 150.00